Tag Archives: fire suppression system

Which Fire Suppression System Is Best? | Corona, CA

When you hear the words fire suppression, what do you think of? For many of us, it would include things like fire extinguishers and fire sprinklers. But there are lots of ways that a fire can be suppressed. The real issue is which method is best for you. Electronics-filled datacenters, where traditional fire sprinklers are not only ineffective, but can potentially be very damaging to the assets they’re meant to protect. But for other buildings, those fire sprinklers are exactly what you need. Fire suppression systems come in many different styles and can be incredibly useful for a variety of industries:

  • For kitchen environments, wet chemicals such as potassium carbonate are often used.
  • In areas with high volumes of flammable liquids, many suppression systems tend to use foams, such as custom detergents or polysaccharides.
  • Areas sensitive to liquid damage, such as datacenters, medical offices, and libraries, peptafluoropropane (a colorless halocarbon gas) can suppress fire without damaging paper or electronics.
  • In areas with explosive fluids, such as gasoline, solvents, or propane, dry chemical suppressants are often used, such as sodium bicarbonate or potassium bicarbonate, or Monnex (potassium allophananate).
  • Unoccupied areas, such as transformer vaults and electrical containment rooms, carbon dioxide may be used.
  • Finally, in places where ordinary substances need to be protected, simple water or water mist may be used.

Because there are a number of different federal, state and local codes to follow, and industry best practices to consider when designing, installing, and maintaining your fire suppression system, consulting with an expert is vital to complying with the law and maintaining a safe environment for both people and assets.

For more information about fire suppression systems, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona, CA and all surrounding areas.

Why Maintenance Is Necessary | Corona, CA

automatic-fire-sprinkler-systems

It seems like we have gotten through the summer with little instances of the wildfires typically present in our area, but we aren’t quite past the fire season just yet. The next couple months will dictate if we will continue this lucky streak. But whether or not we have a wildfire strike, we should always be ready. And if you have installed a fire suppression system, it’s time to do a little bit of maintenance.

The maintenance regime needed depends on the suppression system and use case. The National Fire Prevention Association (NFPA) has guidelines not only for the types of systems that should be used in various settings, but also for the ongoing maintenance of those systems for proper compliance and safety purposes.

The type of system installed, and the nature of the building it is protecting, will determine how often it must be inspected, how often it should be tested, and what type of labor will be required on the system over time. A skilled system designer will not only design the system but can also assist you in establishing and meeting the maintenance and inspection requirements in order to keep your system functioning properly. This way, if a fire were to occur, lives and property can be saved.

Regular maintenance will identify minor problems before they turn into system failures, allowing you to correct them quickly and inexpensively before they fail. With automatic scheduling of maintenance activities, you never need to worry about surprise fire department inspections – you’ll be up to date, properly maintained, properly inspected, and fully functional whenever the fire department decides to visit.

For more information about suppression system maintenance, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona, CA and all surrounding areas.

How to Protect a Datacenter from Fire | Corona, CA

Do you know what a datacenter is? Datacenters are built specifically to house millions of dollars of expensive electronics and contain custom-built solutions for everything from cooling to power continuity and generation. Due to the 24/7 nature of datacenters, most systems are designed for redundancy and fail-safe operation with cabinets of battery-powered, uninterruptible power supplies reside to complement generators.

But what if there’s a fire? Computers present a unique fire suppression challenge – they’re easily damaged by water, are typically contained in a metal box that will shelter a fire from overhead sprays, and they require significant amounts of electricity that presents an electrocution risk for standard suppression systems. Because of this, typical datacenter suppression systems come with two complementary systems – one wet, and one dry.

Modern alternatives tend to be either inert gas systems (where an inert gas is pumped into the datacenter to smother the fire by depriving it of oxygen) or clean agent systems, where halocarbon molecules are pumped in and absorb heat, extinguishing the fire.

While dry systems are often the first line of defense, due to their ability to extinguish fire without damaging equipment, a second water-based system is typically available. Best practices often dictate that the pipes above the datacenter itself be dry – that is, pipes are not filled with water until a fire is indicated, at which point the pipes are filled. Typical configuration allows the clean agent or inert gas system to attempt to put out the fire long before the heat allows a sprinkler to discharge.

For more information about datacenter fire protection, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona and all surrounding areas.

Stay Safe this Summer with Fire Prevention | Corona, CA

Contrary to popular belief, we are not at high risk for fires in hotels or other public places. But, in fact, our biggest threats are at home, where we typically feel our safest. And since much of our summertime fun involves BBQs and fun with friends and family, it is important to be ready for any type of fire danger, from accidental fires at home to wildfires that pop up without warning. One way to do this is with fire sprinklers. You may not automatically think about fire sprinklers in our homes, but home fires can cause property damage, or far worse – take the lives of our loved ones.

Nearly, 2,500 people lose their lives each year in home fires in the United States. It can be nerve wracking to think about these statistics, however, this should be a reason to consider installing fire sprinklers in your home.

Because Hollywood makes an exaggerated image of everything, including fires, many people seem to think that when a fire occurs, the entire system goes off & soaks the place down. This is false. When one fire sprinkler is triggered, the rest do not activate. Nearly 85 percent of the time only one fire sprinkler activates during a fire, which as mentioned earlier, results in significantly less property damage when compared to a fire hose. And now that homes are burning more quickly than before due to having larger spaces and lightweight construction materials, having a fire suppression system is extremely important.

Summertime is a fun time for getting outside and enjoying the weather. Make sure you have one less worry by having fire sprinklers installed in your home.

For more information about fire extinguishers, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona and all surrounding areas.

Why You Need Back Flow Testing | Corona, CA

Fire prevention is key to ensuring the safety of your property and loved ones. We protect ourselves by equipping our property with plenty of fire prevention tools. But with all of the fire alarms and sprinkler systems, we often fail to think about a very important aspect to our preventative measures – back flow prevention.

Back flow testing is incredibly important, not only in the world of fire, but in the aide of our water supply. Back flow preventers are installed in order to keep your pressurized fire sprinkler water line from flowing back into the municipal water line. This is possible if whenever there is a loss of pressure from the municipal line. Back flow preventers eliminated the possibility of polluting the water system through cross contamination.

In water supply systems, water is normally maintained at a significant pressure to enable water to flow from the tap, shower etc. When pressure fails or is reduced, as may happen if a water main bursts, pipes freeze or there is unexpectedly high demand on the water system, then such reduced pressure in the pipe may allow contaminated water from the ground, from storage or from other sources to be drawn up into the system.

Once you have installed an approved back flow preventer, it is important that it is tested out. This can only be done by a licensed backflow tester. Once tested and approved, you’re good to go!

CJ Suppression offers back flow testing, call today if you to schedule an appointment or if you have any questions!

For more information about back flow testing, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

Accepting patients from Chino, Ontario, Redlands, Moreno Valley, Upland, Rancho Cucamonga, Rialto, Fontana and all surrounding areas.

The Hermitage gets an Upgrade

The Hermitage

The Hermitage mansion, home of the seventh U.S. President Andrew Jackson, recently received a renovation for fire suppression, three full decades after the last time the fire protection system was upgraded.

The Hermitage has had quite a few brushes with fire, starting from 1834, when a chimney fire heavily damaged the house. While rebuilding the house to be more fashionable, Jackson also added several precautions in case of a future fire, including a metal roof and white fireproof paint to cover the smoke-damaged brick.

This year, the Hermitage is receiving yet another renovation to improve its fire protection system. The new system is funded in partnership with the State of Tennessee and was created with the expertise of the Nashville Fire Marshal’s Office.

For the past thirty years, the mansion utilized a traditional fire sprinkler system, which functions by soaking an area with large quantities of water to suppress a fire until the fire department can arrive and extinguish it. The old system was dependent on strong water pressure to expel water, but continued building in the area has since diminished the Hermitage’s water pressure. The combination of the low water pressure and the site’s existing piping meant that the Hermitage was no longer able to support a traditional sprinkler system.

The new fire protection system utilizes automatic mist fire suppression, allowing it to extinguish fires faster than the traditional system while using far less water. The reduction in water sprayed also means less damage to historic objects inside the mansion and the structure itself in the case that the sprinklers do engage. This results in less time and money spent on cleaning and repairing in the aftermath of a fire.

https://www.tennessean.com/story/news/2018/02/16/hermitage-installs-new-fire-protection-andrew-jackson-home/309299002/

Spring Clean Your Fire Safety | Corona, CA

fire extinguisher trainingNow that the chilly days are warming up and the seasons are beginning to change, it’s time for everyone to get to their favorite springtime task – spring cleaning. But there are some items that are generally overlooked by even the best spring cleaners, and these minor tasks can save your life:

Grills. The NFPA reports that an average of 8,900 home fires are caused by grilling each year. Since this is the season to spark up the grill, make sure you check each the propane tank, the hose, and all connecting points. Make sure the grill is clean — it is a contributing factor in nearly 20% of all grill structure fires so make sure it isn’t near anything flammable. If you have an outdoor fit pit, the same rules remain. Be careful when you celebrate the warm weather.

Chimneys. The odds of you sparking up a cozy fire in the springtime months are pretty slim, so make sure to clean up your fireplace until next year. Another good idea would be to have an inspection and cleaning done. Why wait until the last minute?

Smoke alarms. Regardless of whether or not it was used, the batteries should be changed once a year, so this is an excellent task in the spring. However, test the alarm to make sure things are in working order once a month.

Dryers. The leading cause of clothes dryer-related fires is a failure to keep them clean, so make sure to clean the lint trap after every load, but while spring cleaning, add clean out vent pipe to the list.

For more information about springtime fire safety, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

Accepting patients from Chino, Ontario, Redlands, Moreno Valley, Upland, Rancho Cucamonga, Rialto, Fontana and all surrounding areas.

In-Home Sprinkler Systems: What You Need to Know | Corona, CA

Conducting regular maintenance and inspections for residential sprinklers are always a good idea, especially if you have a family you need to protect. Besides, they’re not even that difficult to do and you can easily do it yourself. Here are a few tips to protecting your property:

Make visual checks on all your shutoff valves. The first step is to make a visual check on all the water shutoff valves to see if they’re all open and if the storage tank is full.

Conduct flow tests periodically. Flow tests are also a definite must and should be conducted every few months. Having a system with a clearly-labeled flow-test valve that sprinkles to the outside can help tremendously in this regard. To test, simply open the valve slowly and let the water run its course for more than a minute.

Check the sprinkler components. Make sure that the sprinkler heads and cover plates are not painted over as this will cause problems with their operation.

Use visual signs. Majority of hazards resulting from sprinklers often result from locking the sprinkler valves in the closed position by mistake. Placing signs near the sprinkler components can help remind you and anyone in your house or building what the correct positions are.

Secure the control valves. If your valves are connected to your fire alarm system, you can supervise them electronically. You can also try putting up LO/TO signs to prevent unauthorized closures.

If you have doubts about whether you’ve checked it properly or not, check with your local fire marshal regarding laws regarding sprinklers your area and how to know if a sprinkler inspector is licensed and legitimate.

For more information about in-home fire sprinklers, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

Accepting patients from Chino, Ontario, Redlands, Moreno Valley, Upland, Rancho Cucamonga, Rialto, Fontana and all surrounding areas.

Foam: Not Just for Your Coffee Anymore | Corona, CA

As we begin the new year, we tend to think of different ways to improve upon ourselves. Sometimes it isn’t just our health that should be considered. If you are looking to keep you and yours safe and healthy this year, think about the way you can protect yourselves against any home accidents, especially fire prevention. While there may be lots of ways you can be prepared for a fire, one way to keep yourselves safe is a foam fire suppression system.

So, what is foam suppression? Engineered and manufactured, foam fire suppression systems ensure a rapid, thorough and economical response to fires and spills. A light, voluminous foam blanket produced by our high-expansion foam systems can quickly obtain great heights, reaching elevated flammable materials. This foam blanket efficiently transports small amounts of water to the fire, encapsulating the flammable vapors, causing suppression and extinguishment.

Customized to application specifications, engineered systems include: bladder tanks and pump-type balanced-pressure proportioning systems, in-line balanced-pressure proportioning systems, high-expansion foam systems, large dry chemical systems and skids, twin-agent systems and skids, foam trailers, large dry chemical and twin-agent trailers, monitor trailers, aqueous film-forming foam (AFFF) pump systems, water-powered AFFF pump skids, foam/water monitors, nozzles, eductors, ratio-flow controllers, foam makers and chambers, specialized proportioning storage and monitor trailers.

Useful for various purposes, high-expansion foam systems provide protection for the following applications: aircraft hangars, basements, cable tunnels, flammable packaging areas, flammable liquid drum storage areas, hazardous waste facilities, LNG tank farms and loading facilities, mines, roll-paper warehouses, shipboard engine rooms, bilges, and holds, storage buildings, warehouses, and fire breaks.

 

CJ Suppression: For all Your Fire Suppression Needs | Corona, CA

fire extinguisher trainingHere at CJ Suppression, we offer a multitude of fire protection services that fit all your fire needs. We are dedicated to supplying top notch service and providing our customers with quality end results. How can we help you with fire safety? Here’s a list of services we provide:

Inspections/certifications. Per the National Fire Protection Association (NFPA) 25 California Edition codebook, all fire protection systems are required to be inspected and certified. Our trained technicians perform all required inspections.

Title 19 (5-year Inspection). This procedure inspects all components of your fire protection system and is performed every five years.

Backflow. Testing and certification is required annually in most jurisdictions.

Flow tests. The most popular reasons for hydrant flow testing is for system inspection/certification or water flow requirements being obtained for system hydraulic calculation design.

Kitchen hoods. We perform installation, inspection, testing, certification and cleaning of kitchen hoods per NFPA codes requirements.

Maintenance. Maintaining of all fire protection systems is key to ensure proper operation during a fire event. We can provide a structured maintenance program with automatic scheduling within our in-house database, so you don’t have to worry about scheduled maintenance or surprise fire department inspections.

Repairs. We provide repair service of any type of fire protection system from underground fire line to overhead wet, dry or special hazard systems.

24-hr emergency service. Our on-call staff can facilitate support for any type of emergency around the clock.

Employee training. We provide education and training sessions of all types of fire protection systems to employees and or management.

For more information about fire safety, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

Accepting patients from Chino, Ontario, Redlands, Moreno Valley, Upland, Rancho Cucamonga, Rialto, Fontana and all surrounding areas.