Tag Archives: suppression services

We’re Here to Help at CJ Suppression | Corona, CA

fire extinguisher service

Fire safety is important for both you and everything you’re responsible for. We are a one-stop shop for all of these needs because we are dedicated to supplying top notch service with quality end results:

Inspections/certifications. Our trained technicians perform all required inspections and testing to ensure your fire protection system is fully operational.

Title 19 (5-year inspection). This procedure inspects all components of your fire protection system and is performed every five years.

Annual. This procedure inspects the required components of your fire protection system on a yearly basis.

Quarterly. This procedure inspects the required components of your fire protection system every 3 months.

Fire pumps. Fire pump inspections are typically performed annually and more frequent depending on the authority having jurisdiction or insurance carrier.

Backflow. Testing and certification are required annually in most jurisdictions.

Flow tests. Hydrant flow testing are needed for system inspection/certification and water flow requirements for system hydraulic calculation design.

Kitchen hoods. We perform installation, inspection, testing, certification and cleaning of kitchen hoods per NFPA codes requirements.

Maintenance. We can provide a structured maintenance program with automatic scheduling within our in-house database.

Repairs. We provide repair service of any type of fire protection system from underground fire line to overhead wet, dry or special hazard systems.

24-hr emergency service. Our on-call staff can facilitate support for any type of emergency around the clock.

Employee training. We provide education and training sessions of all types of fire protection systems to employees and or management.

Fire extinguisher service. We specialize in service and sales of all fire extinguishers.

Fire extinguisher training. Our onsite training for any size company to ensure proper protocol in case of a fire event.

For more information about our services, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona, CA and all surrounding areas.

When Tenant Improvements Are Necessary | Corona, CA

Having safe and protected buildings are a top priority for any landlord. Not only does it keep your tenants safe, but it also keeps your investment protected. And as time goes on, wear and tear take place and buildings need to have some improvements done. The same goes for fire safety – we need to invest some time and money in order to protect everyone and everything from a fire. Fire sprinklers are a fantastic investment in order to keep up your fire safety, but even this needs to be improved from time to time. It is time to call in a professional.

But where do you start? It can be a daunting task trying to figure out just what you need to be fire safe. You can rely on word of mouth, but can you be sure? When making tenant improvements, it is essential to confide in a reliable company that will get the job done in a timely manner. After all, improving anything will surely disrupt your daily business, so having things done quickly and correctly is necessary to keep things moving smoothly. The professionals of CJ Suppression have years of expertise with tenant improvements and specialize in all of the following:

  • Installation
  • Relocation
  • Rework within improvements
  • Remodels
  • Modifying fire sprinkler systems

Thorough tenant improvements ensure that your business runs smoothly and efficiently. For this reason, it is vital to rely on our company to avoid any complications. Call CJ Suppression in Corona, CA today and ask about how our experience with tenant improvements can help you.

For more information about tenant improvements, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona, CA and all surrounding areas.

Fire Sprinklers in the Home? Find Out Why | Corona, CA

When we think of fire sprinklers, we generally don’t assimilate it with our home. Thought of as something that is designed for businesses and factories, fire sprinklers aren’t a concern for many homeowners. But should they be? Let’s take a look at their advantages – you may reconsider your decision:

Can’t stop the blaze. As smart as smoke alarms are these days, they can’t extinguish fire. Sprinklers do and continue to do so as you and your family run for safety. Also, by stopping the fire as soon as it starts, sprinklers can prevent, or at least reduce, the amount of property damage.

Not activated by smoke. Your fire alarm going off because of burned toast and a snuffed candle certainly can be annoying. With sprinklers, you don’t have to worry about that because they are activated via heat, not smoke.

Instant help. Sprinklers will activate within a minute – a whole lot less time than it takes for your local firefighters to get to your home. Also, sprinklers can help slow down the fire and minimize the damage done until the firefighters arrive to completely douse the fire.

Cost-effective. Firefighters use an average of 2,935 gallons to extinguish your regular residential fire. That’s many times more than the 341 gallons of water used by sprinklers on average.

Insurance-friendly. Your insurance provider may lower your premiums thanks to your sprinkler system. Be sure to contact your home insurance provider to know if this applies to you.

The costs of having sprinklers installed far outweigh the costs of losing a huge part of your house. In some cases, families lose their entire homes because of residential fires. Don’t let that happen to your family by having sprinklers installed.

For more information about fire sprinklers, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona, CA and all surrounding areas.

Protect Yourself from Fire | Corona, CA

Protecting your business from fire is imperative for everyone involved. Not only in order to protect your product, but any staff and/or neighbors should also feel safe there knowing you are covered in case of fire. But designing a fire protection system isn’t as simple as a quick kit you pick up at the local hardware store. It takes a lot of planning and expertise. It can turn overwhelming very easily if you don’t have the proper training. That’s where we come in…

We begin with a site survey of the facility then provide the client with appropriate alternatives based on an assessment of the fire protection and life safety needs. We will often consult with the client’s insurance company and the local fire department for their input during the decision-making process, in order to ensure that everything is up to code and covered by insurance, then develop the appropriate engineering design.

Our CAD design services include:

  • Fire sprinkler design drawings with as much detail as required and then some.
  • All designs are based on the latest NFPA codes. All schematic CAD drawings include underground fire supply, riser details with location within structure, main and branch line locations, sprinkler head type and location.
  • Bid drawings can also include back-up specifications, water analysis, and hydraulic calculations.
  • Fire sprinkler fabrication / installation / coordination drawings include all compliments listed above including computer generated shop drawings, hydraulic calculations and material submittals.
  • Fire Pump and/or Ground Storage Tank installation drawings with all associated piping and equipment.
  • Special hazard suppression system fabrication / installation drawings.

So, if you are in need of better fire protection for your facility, consider installing a fire protection system. It is the best chance you have to keep your business successful and in one piece.

For more information about fire suppression systems, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona, CA and all surrounding areas.

What Is a Fire Suppression System? | Corona, CA

fire extinguisher serviceIt seems like everywhere we look another fire has started to tear through the state. Fire season is one of the scariest times of year if you live in California. If order for our businesses to stay safe, we try to protect ourselves from any fire damage that may occur. To do this, we purchase and install plenty of fire extinguishers and alarms. But if you are installing a fire suppression system, it is important to know what you are dealing with in order to ensure everything and everyone is protected and safe if a fire were to occur. The first components to consider are active components:

  • In order for a suppression system to be effective, detection is key. Professional suppression will use numerous sensors and alarms to detect heat, smoke, and other signs of fire.
  • Once the alarm is triggered, traditional fire extinguishers may be able to extinguish a fire before the full suppression system is activated.
  • Once a fire is detected, the fire may be combatted with sprinkler systems (wet or dry) or chemical-based systems (gaseous systems that displace oxygen, foam systems, or other extinguishing agents).
  • Placement of fire hydrants and plumbing of pipes for fire fighters can help protect a business in case of fire.

Beyond active components, a properly designed system will incorporate passive components – such as firewalls, fire-stops, grease-ducts, and fire-rated materials to help slow the spread of fire, and limit exposure, and protect high risk materials from heat and flame sources. While these components will not necessarily stop a fire, they can help prevent or slow a fire to make containment easy.

For more information about fire suppression systems, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona, CA and all surrounding areas.

Fire Extinguisher Training Is Important | Corona, CA

fire extinguisher serviceEveryone knows that if a fire is started, the first thing to do is grab a fire extinguisher. But do you know if everyone knows how to use it? Without the proper knowledge on how to use a fire extinguisher, your business is at risk of severe fire damage. Without proper training in the use of fire extinguishers, you can risk damage due to lack of control and ability to diminish a fire. It is important to seek fire training for your staff to ensure proper protocol in case of a fire-related accident. As a quick reference, when reaching for a fire extinguisher, attack the fire using the PASS Method:

Pull the pin. By pulling the pin, the operating lever should unlock and allow you to discharge the extinguisher.

Aim low. Pointing the extinguisher hose/nozzle at the base of the fire will make it dissipate quicker.

Squeeze the lever. This should discharge the extinguishing agent. Some extinguishers may have a button or other means of activation. Become familiar with your equipment prior to an emergency.

Sweep from side to side. While you are aiming at the base of the fire, you should sweep back and forth until the fire is extinguished. If it starts up again, start over and do it again.

Avoid putting your business or company in danger because the skilled experts of CJ Suppression will work diligently and thoroughly with you on how to operate a fire extinguisher. With fire extinguisher training your business will be prepared for any fire event.

For more information about fire extinguisher training, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona, CA and all surrounding areas.

Crispy Nights Call for Toasty Fires | Corona, CA

As the autumn months progress and the temperatures are slowly beginning to drop, we all begin to prepare for the chilly weather by warming up our homes. And if you have a fireplace, wood or pellet stove, this means it’s time to prepare your fireplace and chimney to ensure a safe season. Let’s take a look at some of these steps…

First thing’s first, everything needs a good cleaning. If you have a chimney, hire a licensed chimney specialist to not only give a good your chimney a good cleaning, but can also check for any issues that may have come up during the warmer months. Clean your stoves and fireplaces as well and make sure you don’t have any combustible items near a flame.

When you light your fires, make sure the flue is open to vent properly and keep mesh guards to ensure no embers escape. Conversely, if you have glass doors in front of your fireplace, keep those doors open to ensure the fire completes combustion and reduce creosote build-up in your chimney.

Never leave a fire unattended – make sure the fire is completely out before leaving the house or going to bed. After your fire, you will have plenty of ashes. They need to cool, at times it can take up to several days, before disposal. Keep the ashes in a metal can at least 10 feet away from your home.

Autumn is a beautiful time of year, one that is welcomed by toasty fires and hot apple cider. Don’t let accidents ruin this snuggly time.

For more information about fireplace maintenance, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona and all surrounding areas.

Prepare for a Malfunction | Corona, CA

fire sprinklersWe all assume that if we have fire protection, it will work when the time comes to use it. Whether it be something simple like a fire extinguisher or as elaborate as a customized fire suppression system, these tools are things we need to rely on when a fire breaks out. If it doesn’t, the result can be a disaster.

It’s important to note that simply installing a suppression system is only one step in staying safe. Fire suppression systems are often complex pieces of engineering, and they require care, testing, and maintenance in order to remain functional.

The type of system installed, and the nature of the building it is protecting, will determine how often it must be inspected, how often it should be tested, and what type of labor will be required on the system over time. A skilled system designer, such as CJ Suppression, will not only design the system, but can also assist you in establishing and meeting the maintenance and inspection requirements in order to keep your system functioning properly so that if a fire were to occur, lives and property can be saved.

The exact maintenance regime needed depends on the suppression system and use case. The National Fire Prevention Association (NFPA) has guidelines not only for the types of systems that should be used in various settings, but also for the ongoing maintenance of those systems for proper compliance and safety purposes.

To ensure their reliability, fire systems must be inspected, tested and maintained. CJ Suppression Services’ qualified and experienced staff stands ready to provide fire protection service and maintenance that will keep your fire protection systems reliable and code compliant.

For more information about fire suppression maintenance, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona and all surrounding areas.

Dozens of Massachusetts Homes Exploded. A Gas Expert Weighs In. | Corona, CA

by RACHEL GUTMAN

SEP 14, 2018

WCVB / AP

Investigators still don’t know what happened, but there’s one likely explanation.

Late Thursday, dozens of explosions erupted in three towns in northern Massachusetts. As many as 70 fires, explosions, and suspected gas leaks were reported to state police, with at least 39 homes affected in Lawrence, Andover, and North Andover. One person was killed when a chimney collapsed on his car, and at least 25 more people were reportedly treated for injuries.

In a statement, Columbia Gas said a total of 8,600 customers will be without service until safety teams can ensure that their homes and businesses are leak-free.

A widespread series of explosions like the one in Massachusetts is “really rare,” says Robert Jackson, a professor of energy and environmental science at Stanford University. Jackson’s studies focus on the environmental impacts of natural gas, and he has mapped thousands of gas leaks in cities around the country, including Boston. He told me that such an event is “unprecedented in recent years,” since explosions are usually isolated to a single building.

Jackson is not involved in investigating the Massachusetts explosions, but he was able to offer some insight into what could have caused such a strange, dramatic incident. The most likely explanation, he says, is the one most reports have speculated: Pipelines in the towns became suddenly over-pressurized. In the same way that high-voltage power lines traverse hundreds of miles before breaking off into lower-voltage tributaries in neighborhoods, natural-gas delivery systems consist of both long-distance, high-pressure pipelines and local ones that are only nominally pressurized and deliver gas into homes. Neighborhood pipelines are usually designed to withstand two to three times their normal operating pressure, but any increase makes gas more likely to escape.

“I can’t imagine another explanation for this event than a flush of pressurized gas,” Jackson says.

If local lines indeed were suddenly inundated with high-pressure gas, Jackson says, that could result in an explosion in one of two ways. First, the pipes themselves could explode. Second—and more likely, according to Jackson—excess pressure could have caused gas to leak out of pipes and valves and into homes, where it could be ignited by a pilot light and send whole buildings up in flames.

In most cases, according to Jackson, such rapid pressurization would be caused by a failure at a valve that separates high- and low-pressure pipelines. As for what would lead to such a failure, Jackson says, it could be that “somebody made a mistake. To flip the wrong valve, leave a junction open. Human error is the most common source of natural-gas explosions.”

Columbia Gas’s website announced an improvement campaign just a few hours before the explosions began, though no evidence has yet linked the explosions to pipeline updates or botched repairs. (A spokesperson for Columbia Gas did not respond to a request for comment.)

A flush of gas could also occur if older valves leak or break. In 2015, Jackson and his colleagues found that cities like Cincinnati that replaced their aging pipelines had 90 percent fewer gas leaks a mile than older cities like Boston that relied on older, cast-iron pipes. Across the country, Jackson says, many local pipelines are more than a century old—including in Boston, the closest major city his team studied to Thursday’s explosions.

Even though natural-gas leaks are fairly common, serious consequences aren’t. From 1998 to 2017, 15 people a year, on average, died in incidents related to gas distribution in the U.S. “Significant incidents”—those that do things such as cause an injury or death, result in at least $50,000 of damage, or lead to a fire or explosion—happen about 286 times a year.

That might sound like a lot. But then again, the streets of Boston carry an average of four gas leaks a mile.

 

Stay Safe this Summer with Fire Prevention | Corona, CA

Contrary to popular belief, we are not at high risk for fires in hotels or other public places. But, in fact, our biggest threats are at home, where we typically feel our safest. And since much of our summertime fun involves BBQs and fun with friends and family, it is important to be ready for any type of fire danger, from accidental fires at home to wildfires that pop up without warning. One way to do this is with fire sprinklers. You may not automatically think about fire sprinklers in our homes, but home fires can cause property damage, or far worse – take the lives of our loved ones.

Nearly, 2,500 people lose their lives each year in home fires in the United States. It can be nerve wracking to think about these statistics, however, this should be a reason to consider installing fire sprinklers in your home.

Because Hollywood makes an exaggerated image of everything, including fires, many people seem to think that when a fire occurs, the entire system goes off & soaks the place down. This is false. When one fire sprinkler is triggered, the rest do not activate. Nearly 85 percent of the time only one fire sprinkler activates during a fire, which as mentioned earlier, results in significantly less property damage when compared to a fire hose. And now that homes are burning more quickly than before due to having larger spaces and lightweight construction materials, having a fire suppression system is extremely important.

Summertime is a fun time for getting outside and enjoying the weather. Make sure you have one less worry by having fire sprinklers installed in your home.

For more information about fire extinguishers, call CJ Suppression at 888-821-2334 or visit the website at www.cjsuppression.com.

CJ Suppression proudly serves Corona and all surrounding areas.